zortrax M200 Manual

* available soon
10
MATERIAL PROPERTIES
Z-ABS™
Suitable for mechanical
treatment
High printing precision
Available in a wide range of
colors
Suitable for utility models
Z-ULTRAT™
Suitable for mechanical
treatment
Durable High quality prints Suitable for large prints
Z-FLEX™*
Suitable for mechanical
treatment
Elastic Models are exible and elastic For malleable models e.g. seals
Z-PCABS™*
Resistant to cracking Highly durable Resistant to high temperature Used for automotive parts
Z-GLASS™*
Suitable for mechanical
treatment
Fragile Transparent Used for decorative parts
Z-ALU™*
Suitable for mechanical
treatment
Fragile Unique texture of prints Imitates metal
Z-NYLON™*
Elastic, extensile Highly durable Bendable For elements subjected to load
PRINTING MATERIALS OVERVIEW

zortrax M200 Specifications

General

Build Volume	200 x 200 x 180 mm
Layer Resolution	90-400 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD card
Software	Z-Suite
Operating System	Windows, macOS
Frame	Aluminum
Printing Speed	up to 100 mm/s
Heated Bed	Yes
Bed Temperature	up to 110°C
Nozzle Temperature	up to 380°C
Power Consumption	300 W
Technology	FDM
Supported Materials	Z-ABS, Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG, Z-ESD
Power Supply	100-240 V, 50/60 Hz
Dimensions	345 x 360 x 430 mm
Weight	13 kg