zortrax M200 Manual

16
SOFTWARE & FIRMWARE
Z-FIRMWARE™ UPDATE
Information about latest version for the rmware can be found at
www.zortrax.com and through our newsletter. Download the latest
update for Z-Firmware™ at www.zortrax.com/downloads.
To update the rmware, upload Update.bin le to SD card, insert
the card into the printer and run the machine. Z-Firmware™ updates
automatically.
Z-SUITE® SOFTWARE INSTALLATION
Use .stl, .obj or .dxf format les to work with your Zortrax M200®.
Most CAD and 3D modeling software allows you to convert 3D les
to this format. To prepare a le for 3D printing (in the .zcode format)
install Z-Suite™ on your computer. The newest software version and
the Z-Suite® can be found at www.zortrax.com
To install Z-Suite® software, you need a serial number. The serial
number is provided with the printer.

zortrax M200 Specifications

General

Build Volume	200 x 200 x 180 mm
Layer Resolution	90-400 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD card
Software	Z-Suite
Operating System	Windows, macOS
Frame	Aluminum
Printing Speed	up to 100 mm/s
Heated Bed	Yes
Bed Temperature	up to 110°C
Nozzle Temperature	up to 380°C
Power Consumption	300 W
Technology	FDM
Supported Materials	Z-ABS, Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG, Z-ESD
Power Supply	100-240 V, 50/60 Hz
Dimensions	345 x 360 x 430 mm
Weight	13 kg