What to do if I get error #034 on my zortrax 3D Printers?
Error #034 indicates a problem with the endstops. Check the endstops for proper connection. The suggested solution is to carry out X/Y axes maintenance.
What to do when zortrax M300 3D Printers show error #011?
Error #011 means that the thermocouple has detected too high extruder temperature. The suggested solution is Heater and thermocouple / extruder PCB replacement / extruder cable.
What causes error #012 on zortrax 3D Printers?
Error #012 indicates that the heatbed thermistor has detected too high heatbed temperature. The suggested solution is Heatbed / heatbed cable replacement.
How to fix error #014 heatbed thermistor error on zortrax M300 3D Printers?
Error #014 means there is no signal coming from the heatbed thermistor. The suggested solution is Heatbed / heatbed cable replacement.
What does error #030 mean on zortrax M300 3D Printers?
Error #030 indicates a potential connection issue. Check the connection between the perforated plate and the heatbed cable. The suggested solution is Perforated plate / heatbed cable replacement.
How to troubleshoot error #031 on zortrax M300?
Error #031 suggests a connection problem between the heatbed and its cable. Check this connection. The suggested solution is Heatbed / heatbed cable replacement.
General| Build Volume | 300 x 300 x 300 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD Card |
| Operating System | Windows, macOS |
| Software | Z-SUITE |
| Printing Speed | up to 100 mm/s |
| Heated Bed | Yes |
| Nozzle Temperature | up to 290°C |
| Supported File Formats | .stl, .obj, .dxf, .3mf |
| Supported Materials | Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG |
| Power Supply | 100-240 V, 50/60 Hz |
To Next Page
