99
CTIA Requirements
x Do not disassemble or open crush, bend or deform, puncture or shred.
x Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, expose to fire, explosion or
other hazard.
x Only use the battery for the system for which it is specified.
x Only use the battery with a charging system that has been qualified with the
system per CTIA Certification Requirements for Battery System Compliance to
IEEE 1725. Use of an unqualified battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
x Do not short circuit a battery or allow metallic conductive objects to contact
battery terminals.
x Replace the battery only with another battery that has been qualified with the
system per this standard, IEEE-Std-1725. Use of an unqualified battery may
present a risk of fire, explosion, leakage or other hazard.
x Promptly dispose of used batteries in accordance with local regulations.
x Battery usage by children should be supervised.
x Avoid dropping the phone or battery. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage, take it to a service
center for inspection.
x Improper battery use may result in a fire, explosion or other hazard.
x The phone shall only be connected to CTIA certified adapters, products that
bear the USB-IF logo or products that have completed the USB-IF compliance
program.
To Next Page
Loading...
