Zte Boost Warp 4G - Check the Wireless Network Status; Connect to a Different Wi-Fi Network; Connect to a WPS Network

Web and Data 94
Check the Wireless Network Status
Checkthestatusofyourcurrentwirelessnetwork,includingspeedandsignalstrength,throughthe
Wi-Fisettingsmenu.
1.
Touch > >Settings>Wi-Fi.
2. Touchthewirelessnetworkthatthephoneiscurrentlyconnectedto.Youwillseeamessage
boxshowingtheWi-Finetworkname,status,speed,signalstrength,andotherdetails.
Note:Ifyouwanttoremovethephone’swirelessnetworksettings,touchForgetonthiswindow.
Youneedtoenterthesettingsagainifyouwanttoconnecttothiswirelessnetwork.
Connect to a Different Wi-Fi Network
UsetheWi-FisettingstoscanforandconnecttoadifferentWi-Finetwork.
1.
Touch > >Settings>Wi-Fi.DetectedWi-Finetworksaredisplayed.Tomanually
scanforavailableWi-Finetworks,touch >Scan.
2. TouchanotherWi-Finetworktoconnecttoit.
Note:Ifthewirelessnetworkyouwanttoconnecttoisnotinthelistofdetectednetworks,touch+
atthebottomofthescreen,enterthewirelessnetworksettingsandtouchSave.
Connect to a WPS Network
Wi-FiProtectedSetup(WPS)isafeaturethatmakesiteasytoaddyourphonetotheaccesspoint
whichsupportWPS.
YoucanuseoneofthefollowingmethodstoconnectyourphonetoawirelessnetworkusingWPS.
Methodone:WPSbutton(Recommended)
1.
Touch > >Settings>Wi-FiandtouchtheWi-FislidertoturnWi-Fion.
2.
Touch .
3. PresstheWPSbuttonontheaccesspointandtheaccesspointwillrecognizeyourphoneand
addittothenetwork.
Methodtwo:PINnumber
1.
Touch > >Settings>Wi-FiandtouchtheWi-FislidertoturnWi-Fion.
2.
Touch >WPS Pin Entry.
3. TheWPSPINnumberdisplaysonthescreen.EnterthePINnumberintotheaccesspoint's
setuppage.