144
Bridge Mode
Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. Ensure that your device can connect to the Internet by using your
nano-SIM card automatically.
2. Log in to the 5G CPE management web page.
3. Select
Network > Network Mode > Wireless Mode > Bridge Mode,
select the WAN connection network port and then click
Apply.
The
device will be restarted.
4. Connect the computer or other cable-connected client to the LAN
port you selected and the client can obtain the IP address from the
WAN DHCP host and connect to the Internet directly.
NOTE:
All clients connected to your device can access the Internet. You can
use those clients to log in to the 5G CPE management web page.
To Next Page
Loading...
