145
Cable Broadband Mode
Your device supports the cable broadband mode and you can use this
service from your service provider to access the Internet.
1. Log in to the 5G CPE management web page.
2. Select
Network > Network Mode > Cable Broadband Mode
, select
the WAN connection network port and then click
Apply.
The device
will be restarted.
3. Connect the broadband service network to the LAN port you
selected.
4. Connect to the Wi-Fi network with your mobile device and then log in
to the web page again.
5. Select
Network > Wired Network > Connection Mode
and then set
the detailed parameters given by your service provider.
6. Use your clients to access the Internet.
To Next Page
Loading...
