146
Dual-network Modes
Your device supports the dual-network modes (Automatic Mode and
Hybrid Mode). You can use the nano-SIM card and broadband service
network port (WAN) to access the Internet.
1. Insert the nano-SIM card and connect the broadband service
network port to the LAN1 port.
2. Log in to the 5G CPE management web page.
3. Select
Network > Network Mode > Automatic Mode
or
Hybrid
Mode
and then click
Apply.
The device will be restarted.
Automatic Mode:
The wired network is used as the default
network. If the wired network is disconnected, you can use the
nano-SIM card to access the Internet.
Hybrid Mode
: You can use two types of networks to access the
Internet at the same time to increase the network speed. If one is
disconnected, the other still works properly.
4. Select
Network > Wired Network > Connection Mode
and then set
the detailed parameters given by your service provider.
5. Use your clients to access the Internet.
To Next Page
Loading...
