24
25
system administrator before turning it on. In many cases the PIN or password
you set for encryption is controlled by the system administrator.
Before turning on encryption, prepare as follows:
• Set a lock screen PIN or password.
• Charge the battery.
• Keep the phone connected to the charger.
• Schedule an hour or more for the encryption process: you must not
interrupt it or you will lose some or all of your data.
When you’re ready to turn on encryption:
1. From the home screen, tap
> Settings > Security > Encrypt phone.
2. Read the information about encryption carefully.
The Encrypt phone button is dimmed if your battery’s not charged or your
phone’s not plugged in.
If you change your mind about encrypting your phone, tap
.
Warning! If you interrupt the encryption process, you will lose data.
3. Tap Encrypt phone.
4. Enter your lock screen PIN or password and tap Next.
5. Tap Encrypt phone again.
The encryption process starts and displays its progress. Encryption can take
an hour or more, during which time your phone may restart several times.
When encryption is completed, you’re prompted to enter your PIN or
password.
Subsequently, you must enter your PIN or password each time you power on
your phone, to decrypt it.
PHONE CALLS
Phone calls
How to make calls
There are many ways to make a call with your phone, and they’re all easy to do.
Calling from the dialer
1. From the home screen, tap
.
2. Tap
to open the dialer.
3. Enter the phone number with the on-screen
keypad. Tap
to delete incorrect digits.
4. Tap
to place the call.
Tip: To make an international call, press and hold
the 0 key to enter the plus (+) symbol. Next, enter
the country code, followed by the city/area code,
and then the phone number.
Calling from your contacts
1. From the home screen, tap .
2. Swipe your nger up or down to scroll through
the contacts list and tap
next to the
contact you want to call.
Tip: You can search for a contact by tapping the
search eld above the contacts list.
GETTING STARTED
To Next Page
Loading...
