28
29
• Tap to turn the speaker on or off.
• Tap
to put the call on hold.
• Tap
to make another call separately from the rst call, which is put
on hold.
• Tap
to open the Messaging app.
• Tap
to open the Contacts app.
• Tap
to switch between two calls.
• Tap
to merge separate calls into a single conference call.
• Tap
to end the current call.
Warning! Because of higher volume levels, do not place the phone near your
ear during speakerphone use.
Managing multi-party calls
When call waiting and three-way call features are available, you can switch
between two calls or set up a conference call.
Note: Call waiting and three-way call features require network support and
may result in additional charges. Please contact your service provider for
more information.
Switching between current calls
When you’re on a call, your phone screen informs you that another call is
coming in and displays the caller ID.
To respond to an incoming call while you’re on a call:
Tap Hold current and answer to answer the call. This puts the rst caller on
hold and answers the second call. Tap End current and answer to answer the
second call and end the rst call. Tap Ignore to reject the second call.
Note: Tap
to reject the second call and select a preset text message or
edit one to send to the caller.
To switch between two calls:
Tap
on the screen.
Setting up a conference call
With this feature, you can talk to two people at the same time.
1. In the dialer, enter a number and tap
.
2. Once you have established the connection, tap
> and dial the
second number. This puts the rst caller on hold and dials the second
number.
3. When you’re connected to the second party, tap
.
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the rst to
hang up, all callers are disconnected.
To end the conference call, tap
.
PHONE CALLS PHONE CALLS
To Next Page
