Zte H298N - Wired Connection via Patch Panel

Internet User Guide, ZTE H298N Last amended: 21/10/2014
8
2.3 A ‘wired’ connection using the patch panel (Using your house’s internal wiring)
LAN4 LAN3 LAN2 LAN1 WAN PhoneReset WPS
WLAN
USB2
PowerOn/Off
LAN4 LAN3 LAN2 LAN1 WAN PhoneReset WPS
WLAN
USB2
PowerOn/Off
INTERNET
PORT 1
BLUE
WAN PORT
LAN
PORT
(1-4)
INTERNET
PORT
Take another Ethernet
cable and plug one end
into any of your rout-
er’s LAN ports (1-4)
and the other end into
the relevant port of the
patch panel associated
with the room where
you would like services
provided.
With the other end of this
cable, connect to your PC/
Internet enabled device
through its internet port.
Use another Ethernet cable
and take one end and plug
into a wall socket in the
relevant room that your
internet service has been
enabled to.
Insert an Ethernet
cable into internet
port 1 of the ONT
Take the other end of
the cable and insert
into the Blue WAN
port of your router
1
2
3
4
5
Internal
Wiring