- 13 -
8. Click Finish. The web configuration for your H560N is completed.
8 Configuring the Extender
1. Set the slide switch on side to Extender mode，The Led indicator should be red at first, This
means H560N doesn’t associated to any wireless router.
2. You can press the WPS buttons both of the H560N and the associated wireless router within 2
minutes, if the lights become green and first flash in 5Hz and then random blinking which
shows the configuration is successful. The extender mode can be used now.
3. If the associated wireless routers haven’t WPS button or the lights RED flash (Means association
To Next Page
Loading...
