Zte MC888 - Indicator Lights and Interfaces

13
1.
SIGNAL
(Threelights)
On:Threelightsshowthesignalstrength.Morelightson
meansbettersignals.
O󰀨:Thereisnosignalornonano-SIMcardinserted.
2.
NETWORK Red:Thedeviceispoweredonbutnotregisteredtothe
mobilenetwork.
Bluesolid:Thedeviceisregisteredorconnectedtothe3G/
LTEmobilenetwork.
Whitesolid:Thedeviceisregisteredorconnectedtothe
5Gnetwork.
3.
WIFI On:WLAN(Wi-Fi)worksnormally.
Blinking:WPSisactivating.
O󰀨:WLAN(Wi-Fi)iso󰀨.
4.
POWER On:Thedeviceispoweredon.
O󰀨:Thedeviceispoweredo󰀨.
5.
WPSkey PressthiskeytoactivatetheWPSfunction.
6.
PHONEport Connecttoatelephone.
7.
LANports ConnecttotheWANinCableBroadbandModeorconnect
toaPC.
8.
Powerport Connecttothepoweradapter.
9.
nano-SIM
cardslotand
resethole
Insertyournano-SIMcard.
Resethole:Pressandholdforabout2secondstorestore
yourdevicetothefactorysettings.