Need help?Do you have a question about the Zte MC888D and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| 5G Support | Yes |
| 5G NR Sub6G DL Speed | Up to 3.8 Gbps |
| 5G NR Sub6G UL Speed | Up to 900 Mbps |
| 4G LTE DL Speed | Up to 1.6 Gbps |
| 4G LTE UL Speed | Up to 200 Mbps |
| Wi-Fi Standards | 802.11 a/b/g/n/ac/ax |
| Wi-Fi Bands | 2.4 GHz, 5 GHz |
| Ethernet Ports | 2 |
| Antenna Type | Internal |
| External Antenna Ports | No |
| Battery | No |
| Ethernet Speed | 1 Gbps |
| SIM Card Slot | Nano-SIM |
Connect to the Wi-Fi network using the default SSID and password found on the device label.
Connect your computer to the device using a network cable (RJ45) via the available LAN ports.
Check management settings, wait for initialization, and verify network indicators for connectivity problems.
Verify Wi-Fi is active, refresh network list, select correct SSID, and use the correct Wi-Fi password.
To Next Page
