30
Bridge Mode
Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. Ensure that your device can connect to the Internet by using your
nano-SIM card automatically.
2. Log in to the 5G CPE conguration web page.
3. Change the operation mode to
Bridge Mode
and select the WAN
connection network port. The device will be restarted automatically.
NOTE:
Please disconnect from the Internet rst and then you can change the
mode.
4. Connect the computer or other cable-connected client to the LAN
port you selected and the client can obtain the IP address from the
WAN DHCP host and connect to the Internet directly.
To Next Page
Loading...
