Zte MC888 - Change Your Device Settings

7
Dual-network Modes
Yourdevicesupportsthedual-networkmodes(AutomaticModeand
HybridMode).Youcanusethenano-SIMcardandbroadbandservice
networkport(WAN)toaccesstheInternet.
1. Insertthenano-SIMcardandconnectthebroadbandservice
networkporttotheLANport1.
2. Logintothe5GCPEmanagementwebpage.
3. Changeoperationmodeto
Automatic
or
Hybrid Mode
.Thedevice
willberestartedautomatically.
• 
Automatic:
Thewirednetworkisusedasthedefaultnetwork.
Ifthewirednetworkisdisconnected,youcanusethenano-
SIMcardtoaccesstheInternet.
• 
Hybrid Mode:
Youcanusetwotypesofnetworkstoaccess
theInternetatthesametimetoincreasethenetworkspeed.
Ifoneisdisconnected,theotherstillworksproperly.
NOTE:
PleasedisconnectfromtheInternetrstandthenyoucanchange
mode.
4. Setthewirednetworkparametersgivenbyyourserviceprovider.
5. UseyourclientstoaccesstheInternet.