33
1.
SIGNAL
(Three lights)
On: Three lights show the signal strength. More lights
on means better signals.
O: There is no signal or no nano-SIM card inserted.
2.
N E T W O R K
Red: The device is powered on but not registered to the
mobile network.
Blue solid: The device is registered or connected to the
3G/4G mobile network.
White solid: The device is registered or connected to
the 5G network.
3.
WIFI
On: WLAN(Wi-Fi) works normally.
Blinking: WPS is activating.
O: WLAN(Wi-Fi) is o.
4.
POWER
On: The device is powered on.
O: The device is powered o.
5.
WPS key Press this key to activate the WPS function.
6.
LAN ports Connect to a PC or laptop.
7.
Power port Connect to the power adapter.
8.
nano-SIM card
slot and reset
hole
Insert your nano-SIM card.
Reset hole: Press and hold for about 2 seconds to
restore your device to the factory settings.
To Next Page
Loading...
