9
1. POWER
On: Power is on and external power supply is
working normally.
O: Power is o.
2. WIFI
White on: Wi-Fi works normally.
White blinking: WPS is activating.
O: Wi-Fi is o.
3. NETWORK
White solid: Your device is connected to the
Internet.
Red solid: Your device isn’t connected to the
Internet.
O: The network cable isn’t connected.
4. WPS key Press activate the WPS function.
5. USB port Support shared storage.
6. PHONE port This port is disabled and cannot be used.
7. LAN ports
WAN/LAN1 port: Connect to WAN via a network
cable.
LAN2 port: Connect to a PC via a network
cable.
8. Power port Connect to the power adapter.
9. Reset hole
Press and hold for about 3 seconds to restore
your device to the factory settings.
To Next Page
Loading...
