How to recover a forgotten password on Zte MF25A?
For the Wi-Fi connection password, please check the label on the Zte Wireless Router device. The default password of the webGUI configuration page is admin. If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
What to do if I cannot access the internet at all with my Zte Network Router?
If you cannot access the internet at all using your Zte Network Router, check your configuration settings and wait 1 to 2 minutes for the router to initialize. Also, check your service indicator LEDs.
What to do if I cannot establish the Wi-Fi connection between my device and client on Zte Wireless Router?
If you cannot establish a Wi-Fi connection between your device and client using your Zte Wireless Router, ensure the Wi-Fi function is active. Refresh the network list and select the correct SSID. Check the IP address settings to ensure your client obtains an IP address automatically. Lastly, verify you're typing the correct network key (Wi-Fi password).
How to fix Zte MF25A Wireless Router when I cannot access the Internet at all?
If you can't access the internet with your Zte Wireless Router, first check your configuration settings. Then, allow 1–2 minutes for the router to initialize. Finally, check your service indicator LEDs.
Why are the download or upload speeds very slow on my Zte Wireless Router?
If your download or upload speeds are very slow with your Zte Wireless Router, it might be due to signal strength. Check your signal strength and network type.
What to do if the signal strength indicator is always blinking or does not light on Zte Wireless Router?
If the signal strength indicator is always blinking or does not light on your Zte Wireless Router, it indicates poor reception. Try moving the router to another location near the window.
Why is the RSSI signal indicator always blinking on my Zte Network Router?
If the RSSI signal indicator on your Zte Network Router is always blinking or does not light, this indicates poor reception. Try moving the router to another location, preferably near a window.
What to do if I can’t make calls while surfing the net on my Zte Network Router?
If you can’t make or receive a call when you are surfing the net with your Zte Network Router, and you are connected using the 2G (GSM) network, you cannot surf the net and make a phone call simultaneously. Please disconnect the internet and wait 30 seconds to 1 minute before making a call.
Why do I hear a rapid engaged tone on my Zte Network Router?
If you hear a rapid engaged tone as soon as you lift the phone off the hook connected to your Zte Network Router, put the phone back on the hook and try again. If you are connected to the internet using the 2G (GSM) network, please disconnect this first.
What to do if I hear silence after dialing on my Zte Network Router?
If you hear nothing or silence after dialing the last digit on your Zte Network Router, you can press the # key or wait 4-8 seconds to connect the call.
General| Brand | Zte |
|---|---|
| Model | MF25A |
| Category | Wireless Router |
| Language | English |
General details about the router, including safety and maintenance.
Details the device's compliance with FCC rules and regulations.
Important warnings related to CE certification and proper device usage.
Physical description of the ZTE MF25A router and its components.
Explanation of the device's LED indicators and their states.
Step-by-step guide for installing the router, including SIM card and connections.
Instructions on how to properly insert the SIM card into the router.
Instructions on connecting the router to a computer via Ethernet.
Steps to power on the router after connecting the adapter.
Procedures for making voice calls using the router's phone interface.
How to receive and answer incoming voice calls.
Steps to prepare for internet connection, including cable and Wi-Fi setup.
Steps to establish a connection between your device and the client.
How to access the internet using the router in Bridge Mode.
How to access the internet using the router in Cable Broadband mode.
Steps to access the router's web-based configuration interface.
Connect to Internet by Dial-up program on computer.
Connect to Internet by WAN.
Connect to Internet by (U)SIM.
Configuring WAN connection settings for Cable Broadband mode.
Router automatically connects to WAN when powered on.
Connection established when data transmission is required.
Connect to or disconnect from the Internet manually.
Guide for composing and sending new short messages.
How to view and manage received messages stored on the device.
Accessing and managing saved draft messages.
Displays detailed 3G wireless network information.
Configure network selection mode (Automatic, WCDMA, GSM).
List of connected wireless network stations.
Configure basic wireless network parameters like SSID and security.
Configuration of Wi-Fi operating modes like Mixed Mode or Green Field.
Controls network access based on MAC addresses, allowing or rejecting devices.
Setup firewall rules to protect the network from online threats.
Configure content filters to restrict access to specific websites.
Configure De-militarized Zone settings to separate internal network from internet.
Displays system information, software versions, and uptime.
Settings for administrator password and device management.
Manage PIN status and settings for SIM card security.
Process for upgrading the router's software version.
How to use Wi-Fi Protected Setup for easy device connection.
Solutions for common voice call issues encountered with the router.
Solutions for common internet connectivity and speed issues.
Solutions for other miscellaneous issues with the router.
Specifications for supported network types and frequency bands.
Specifications for the router's power adapter input and output.
To Next Page
