How to recover a forgotten password on Zte MF25A?
For the Wi-Fi connection password, please check the label on the Zte Wireless Router device. The default password of the webGUI configuration page is admin. If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
What to do if I cannot access the internet at all with my Zte Network Router?
If you cannot access the internet at all using your Zte Network Router, check your configuration settings and wait 1 to 2 minutes for the router to initialize. Also, check your service indicator LEDs.
What to do if I cannot establish the Wi-Fi connection between my device and client on Zte Wireless Router?
If you cannot establish a Wi-Fi connection between your device and client using your Zte Wireless Router, ensure the Wi-Fi function is active. Refresh the network list and select the correct SSID. Check the IP address settings to ensure your client obtains an IP address automatically. Lastly, verify you're typing the correct network key (Wi-Fi password).
How to fix Zte MF25A Wireless Router when I cannot access the Internet at all?
If you can't access the internet with your Zte Wireless Router, first check your configuration settings. Then, allow 1–2 minutes for the router to initialize. Finally, check your service indicator LEDs.
Why are the download or upload speeds very slow on my Zte Wireless Router?
If your download or upload speeds are very slow with your Zte Wireless Router, it might be due to signal strength. Check your signal strength and network type.
What to do if the signal strength indicator is always blinking or does not light on Zte Wireless Router?
If the signal strength indicator is always blinking or does not light on your Zte Wireless Router, it indicates poor reception. Try moving the router to another location near the window.
Why is the RSSI signal indicator always blinking on my Zte Network Router?
If the RSSI signal indicator on your Zte Network Router is always blinking or does not light, this indicates poor reception. Try moving the router to another location, preferably near a window.
What to do if I can’t make calls while surfing the net on my Zte Network Router?
If you can’t make or receive a call when you are surfing the net with your Zte Network Router, and you are connected using the 2G (GSM) network, you cannot surf the net and make a phone call simultaneously. Please disconnect the internet and wait 30 seconds to 1 minute before making a call.
Why do I hear a rapid engaged tone on my Zte Network Router?
If you hear a rapid engaged tone as soon as you lift the phone off the hook connected to your Zte Network Router, put the phone back on the hook and try again. If you are connected to the internet using the 2G (GSM) network, please disconnect this first.
What to do if I hear silence after dialing on my Zte Network Router?
If you hear nothing or silence after dialing the last digit on your Zte Network Router, you can press the # key or wait 4-8 seconds to connect the call.
General| Brand | Zte |
|---|---|
| Model | MF25A |
| Category | Wireless Router |
| Language | English |
To Next Page
