Zte MF25A - Login

17
• Wireless Broadband Mode
Connect a PC or laptop to the Lan port to access the Internet.
5. Use the terminal to access the Internet.
WPS Function
The MF25A supports the WPS function. You can use this function
to connect the client to the MF25A.
1. Power on the MF25A, and start the WPS function.
2. Press the WPS button on the MF25A to activate the WPS
function.
3. Enable the WPS function on your client. Follow the system
prompts on your client to nish the connection.
Note:
For detailed operations on the client, refer to the corresponding
product instructions.
Using Your Device