19
Others
Symptom Solution
The signal strength
indicator is always
blinking or does not
light.
This indicates poor reception. Try moving
the router to another location near the
window.
About the password
• For the Wi-Fi connection password,
please check the label on the device.
• The default password of the webGUI
conguration page is admin.
• If you changed the password and
forgot the new password, you need to
restore the device to the factory default
settings.
How to Get in Touch
Get assistance in the following ways:
• Send an E-mail to mobile@zte.com.cn
• Visit www.ztedevice.com
• Call Service Hotline: +86-755-26779999
Troubleshooting
To Next Page
Loading...
