What to do if I can't access the Zte MF275R WebUI configuration page?
If you're unable to access the WebUI configuration page for your Zte Switch, make sure you're entering the correct address, which is either http://192.168.0.1 or http://setup.zte. Ensure that you only use one network adapter in your PC and that you are not using any proxy server.
What to do if failing to connect to Zte Switch via Wi-Fi?
If you're having trouble connecting to your Zte Switch via Wi-Fi, ensure the Wi-Fi function is active. Refresh the network list and select the correct SSID. Check the IP address settings to ensure your client can automatically obtain an IP address in the Internet protocol (TCP/IP) properties. Also, verify that you are typing the correct network key (Wi-Fi password).
What is the default password for Zte MF275R Switch?
The default password for the WebUI configuration page of your Zte Switch is 'admin'. For the Wi-Fi connection password, check the label on the device. If you changed the password and forgot it, you will need to restore the device to its factory default settings.
How to fix Zte MF275R when it cannot access the Internet?
If your Zte Switch cannot access the internet, check your configuration settings and service indicator LEDs. Also, allow 1 to 2 minutes for the device to initialize.
Why are the download/upload speeds so slow on my Zte MF275R?
Slow download or upload speeds on your Zte Switch may be due to signal strength. Check your signal strength and network type.
To Next Page
General