What to do if I cannot access the internet at all on my Zte MF28B Switch?
If you cannot access the internet at all using your Zte Switch, please check your configuration settings. Also, wait 1 to 2 minutes for the router to initialize, and check your service indicator LEDs.
How to fix a blinking or unlit RSSI signal indicator on a Zte MF28B Switch?
A blinking or unlit RSSI signal indicator on your Zte Switch suggests poor reception. Try relocating the router to a different spot near a window to improve signal reception.
Explains the function of each LED indicator on the router.
Instructions for installing the router, including SIM card insertion.
Steps for inserting the (U)SIM card into the router.
Guides on connecting a computer to the router using an Ethernet cable.
Instructions for connecting the router to the WAN port.
How to connect the router to a power source.
Details on establishing network connections via Ethernet and Wi-Fi.
Steps to ensure the device is on and connected before accessing the internet.
Guide to accessing the router's web-based configuration interface.
Steps for logging into the router's web interface using credentials.
Setting up Access Point Name (APN) configurations for LTE.
How to select the network band (Automatic, LTE Only, 3G Only).
Configuration options for the wireless network.
Configures basic Wi-Fi parameters like SSID, mode, and channel.
Settings for securing the wireless network.
Defines the security policy and mode for Wi-Fi network.
Configuration options for WPA and WPA2 security protocols.
Enables setting up firewall rules to protect the network.
Filters network traffic based on MAC address, IP address, or port number.
Configures content filters to restrict access to specific URLs.
Configures system firewall settings to protect the router from attacks.
Configures LAN interface settings like IP address and DHCP server.
Solutions for common issues related to internet connectivity.
Important safety guidelines for using the router.
To Next Page
General