Zte MF28B - DHCP WAN Connection; 4 G Gateway Mode; Dial Up Configuration; APN Settings

14
DHCP
Select DHCP to access the following interface:
Click Apply to confirm your configuration.
In 4G Gateway mode
Dial Up
Click WAN Connection > Connection, you can configure how to connect to the Internet.
There are two connection modes:
• Auto Connect: The router will automatically connect to WAN when it is powered on.
• Manual Connect: Connect to Internet or disconnect from Internet manually.
Click Apply to confirm your configuration, and then the figure will show in the wan connection status.
APN Settings
Click WAN Connection > APN Setting, you can configure APN setting.
Profile Selection: Choose the desired profile name.