13
Please choose the correct operation mode according to your actual network condition. For detailed
information, please contact network operator. Click Apply to finish the setting.
WAN Connection
In Cable Broadband mode
Click WAN Connection, you can configure how to connect to the Internet.
PPPoE
Select PPPoE，input the User Name and Password supplied by the network provider, and select the
Connect mode.
• Auto Connect: The router will automatically connect to WAN when it is powered on.
• Manual Connect: Connect to Internet or disconnect from Internet manually.
Click Apply to confirm your configuration, and then the figure will show in the wan connection status.
Static
Select Static to access the following interface:
Input the related parameters, and then click Apply to confirm your configuration.
To Next Page
Loading...
