To Next PageTo Next Page
Need help?Do you have a question about the Zte ZXR10 5900E Series and is the answer not in the manual?
General| Series | ZXR10 5900E |
|---|---|
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| VLAN | 4K VLAN |
| Routing Protocols | RIP, OSPF, IS-IS, BGP |
| Security | 802.1X, ACL |
| Power Supply | AC/DC |
Details the steps for configuring VLANs, including port assignment, naming, and link types.
Details the commands and procedures for configuring SVLAN on the switch.
Details how to configure SVLAN COS priority values using specific commands.
Details configuring MAC address aging, burning, permanent settings, binding, learning, limiting, protection, and filtering.
Details global STP configuration, modes, parameters, and instance creation in MSTP.
Details ZESR/ZESR+ configuration for area instances, major/access rings, and restart time.
Details ZESS configuration: domain creation, preup time, mode, control VLAN, port settings, and clearing.
Details configuring SVLAN, port MAC duplication, loopback, and one-way PVLAN for linkage networking.
Details configuring link aggregation: trunk groups, member ports, modes, load balance, and deletion.
Details IGMP snooping setup: enabling, ssm-mapping, topology discovery, agent, group/user limits, static config, and timers.
Details UDLD configuration: global settings, message times, recovery options, interface resets, and notification items.
Details LLDP configuration: global settings, hello/hold times, neighbor management, and interface settings.
Details L2PT configuration, including enabling/disabling tunnels and providing a configuration example.
Details configuring 802.3ah: function, enhanced features, discovery modes, and instance setup.
Explains CFM for fault management, covering overview, basic, function, and instance configurations.
Details sFlow configuration: enabling module, agent/collector setup, and interface sampling rates.
Details IPFIX setup: enabling module, cache, aging times, sampling rates, server settings, TOPN, and templates.
