Need help?Do you have a question about the Zte ZXR10 5250 Series and is the answer not in the manual?
General| Weight | 4.5 kg |
|---|---|
| Operating Temperature | 0°C to 45°C |
| MAC Address Table Size | 16K |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Ports | 48x 10/100/1000BASE-T |
| Uplink Ports | 4x 10GE SFP+ |
| Power Supply | AC: 100V～240V AC, 50Hz～60Hz |
| Dimensions | 440mm x 44mm x 360mm |
| VLAN | 4K VLAN |
| Jumbo Frame | 9K bytes |
| Switching Capacity | Up to 336 Gbps |
| Forwarding Performance | 252 Mpps |
Provides guidance for trained personnel on safe installation, operation, and maintenance of equipment.
Covers configurations for managing the switch, including groups, routers, and SNMP.
Details commands for configuring port settings like enable/disable, work mode, speed, duplex, and flow control.
Manages Power over Ethernet settings for ports, including enable/disable, power limits, and priority.
Covers VLAN management, including enabling/disabling, adding/deleting ports and trunks.
Manages MAC address entries, including static, permanent, learning, filtering, and protection.
Configures MAC authentication using RADIUS or TACACS+ for users.
Sets up Link Aggregation Control Protocol, including trunk PVID, enable/disable, aggregator mode, and priority.
Manages IGMP snooping, including enable/disable, VLAN and port settings, and query parameters.
Manages Spanning Tree Protocol settings, including enable/disable, force version, port types, and BPDU guard.
Covers Access Control List configuration, including port, VLAN, and hybrid ACLs.
Manages Quality of Service, including priority mapping, queue scheduling, and traffic limits.
Performs IPv4 related configurations like ping, trace, and ipport settings.
Manages IPv6 layer-3 configurations, including port settings, addresses, and routes.
Covers DHCP snooping, option82, ip-source-guard, and relay functions.
Manages DHCPv6 snooping, option18, option37, option82, and ip-source-guard.
Configures TACACS+ server groups for authentication, authorization, and accounting.
Manages DHCP relay functions, including enable/disable, option82, server settings, and binding.
Manages remote access control for the switch, including IP address filtering.
Configures Simple Network Management Protocol (SNMP) settings, including engine ID, communities, views, and traps.
To Next Page
