Zte ZXR10 5250 Series - Set Ntp Second-Server

Chapter4ServiceConguration
ParameterDescription
key<1-255>AuthenticationID.
Example
ThefollowingexamplesetstheIPaddressoftheNTPserverto202.10.10.10andthe
protocolversionnumberto2:
zte(cfg)#setntpserver202.10.10.10version2
4.23.6setntpsecond-server
Purpose
ConguretheNTPsecond-server.
CommandMode
Globalcongurationmode
Syntax
setntpsecond-server<A.B.C.D>[version<1,2,3>|key<1-255>]
ParameterDescription
ParameterDescription
<A.B.C.D>TheIPaddressoftheNTPsecond-server.
version<1,2,3>ConguretheNTPsecond-server'sversion,defaultis3.
key<1-255>ConguretheNTPsecond-server'sauthenticationkey.
Defaults
ThedefaultversionoftheNTPsecond-serveras3.
Example
ConguretheNTPsecond-server'sIPaddressas192.168.1.1,usetheprotocolversion1.
zte(cfg)#setntpsecond-server192.168.1.1version1
ConguretheNTPsecond-server'sauthenticationkeyas100.
zte(cfg)#setntpsecond-serverkey100
4-421
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential