Zte ZXR10 5250 Series - Set Qos Traffic-Limit Xge-Port Data-Rate

ZXR105250SeriesCommandReference
Guidelines
Thiscommandsetstheingressratelimitfunctioninaccordancewiththisformula:ingress
ratelimit=numberofpackets*lengthofpackets.Thecongurationisvalidonlyiningress
ratelimitglobalbytemode.
Example
Thefollowingexamplesetstheingressratelimitto1000ppsandpacketlengthto64bytes
forport25:
zte(cfg)#setqostraffic-limitge-port25packet-rate1000packet-lenth64
4.14.19setqostraffic-limitxge-portdata-rate
Purpose
Thiscommandsetstheingressratelimitfora10GBport.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitxge-port<2/1-2/4>{data-rate<0-10000000>|disable}
ParameterDescription
ParameterDescription
<2/1-2/4>
Numberofa10GBport.Differentdeviceshavedifferentport
numberranges.Inthesyntax,the5250–52TCdeviceisused
asanexample.
<0-10000000>
Ingressratelimit,inKbpsorKpps.Thecongurationgranularityis
256Kbpsor32Kpps.Theunitandgranularityvarywithglobal
modecongurations.
disableDisablestheportratelimitfunction.
Guidelines
Aftertheratelimitiscongured,ittakeseffectautomatically.
Example
Thefollowingexamplesetstheingressratelimitto1000ppsandpacketlengthto64bytes
forport2/1:
zte(cfg)#setqostraffic-limitxge-port2/1data-rate1000
4-316
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential