Zte ZXR10 5250 Series - Set Poe Port Power-Exceed; Set Poe Port Protect-Time

Chapter4ServiceConguration
4.3.12setpoeportpower-exceed
Purpose
ThiscommandsetstheactiontakenwhenthepowerofaPoEportexceedsthelimit.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>power-exceed{shutdown|warning}
ParameterDescription
ParameterDescription
<portlist>Portlist.Ifthisparameterisnotspecied,itmeansallports.
Example
ThefollowingexamplesetstheactiontakenwhenthepowerofPoEport1/1exceedsthe
limittoshutdown:
zte(cfg)#setpoeport1/1power-exceedshutdowm
4.3.13setpoeportprotect-time
Purpose
ThiscommandsetstherecoverytimewhenthepowerofaPoEportexceedsthelimit.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>protect-time<time>
ParameterDescription
ParameterDescription
<portlist>Portlist.Ifthisparameterisnotspecied,itmeansallports.
<time>Recoverytime,unit:minutes.
Example
ThefollowingexamplesetstherecoverytimewhenthepowerofPoEport1/1exceedsthe
limitto5minutes:
4-71
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential