Zte ZXR10 5250 Series - Show Dhcp Relay Option82 Device; Set Pport Dhcp Relay

ZXR105250SeriesCommandReference
Syntax
showdhcprelayoption82port<1-28>
ParameterDescription
ParameterDescription
<1-28>Portnumber.Differentdeviceshavedifferentportnumberranges.
Inthesyntax,the5250-28TCdeviceisusedasanexample.
Example
ThefollowingexampleshowsDHCPoption82congurationsonport1:
zte(cfg)#showdhcprelayoption82port1
DHCPoption82sub-optioninformationonport1:
Circuit-ID:Disabled
Remote-ID:Enabled
Format:Cisco
DHCPoption82modeinformationonport1:Default
4.40.15showdhcprelayoption82device
Purpose
Thiscommandshowsdeviceinformation,includingANIandremote-ID.
CommandMode
Allcongurationmodes
Syntax
showdhcprelayoption82device
Example
Thefollowingexampleshowsdeviceinformation:
zte(cfg)#showdhcprelayoption82device
DHCPrelayoption82sub-optioninformationondevice:
Access-Node-Identifier:-
Remote-ID:Cisco
4.40.16setpportdhcprelay
Purpose
ThiscommandsetsDHCPrelayinformationonanIPport.
4-560
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential