Zte ZXR10 5250 Series - Set Group V3; Set User V3

ZXR105250SeriesCommandReference
ParameterDescription
disableDisablestrap.
Example
Thefollowingexampleenablesthelinktrapfunction:
zte(cfg-snmp)#settraplinkupenable
5.4.13setgroupv3
Purpose
ThiscommandsetsanSNMPV3groupandthegroup’ssecuritylevel.
CommandMode
SNMPcongurationmode
Syntax
setgroup<string>v3{auth|noauth|priv}[read<string>[write<string>[notify<string>]]]
ParameterDescription
ParameterDescription
group<string>Groupname
noauthNeitherauthenticationnorencryption
authAuthenticationbutnoencryption
privAuthenticationandencryption
read<string>Readview,zteViewbydefault
write<string>Writeview,zteViewbydefault
notify<string>Notifyview,zteViewbydefault
/Example
ThefollowingexamplesetagroupnamedasBN,andsetthegroup’ssecurityleveltopriv
andtheread,writeandnotifyviewstobjView:
zte(cfg-snmp)#setgroupBNv3privreadbjViewwritebjViewnotifybjView
5.4.14setuserv3
Purpose
Thiscommandsetsausername,authenticationmode,andpasswordforSNMPV3.
5-18
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential