Zte ZXR10 5250 Series - Show Cable-Diag; Set Port Eee

ZXR105250SeriesCommandReference
4.2.23showcable-diag
Purpose
Thiscommandshowsthenumbers,up/downstatus,andvirtuallinedetectionresultsofall
ports.
CommandMode
Allcongurationmodes
Syntax
showcable-diag
Guidelines
IfaportdoesnotsupportVCT,N/Aisdisplayed.ForanFEport,twopairs(MDI[0]and
MDI[1])ofdetectionresultsaredisplayed.ForaGEport,fourpairs(MDI[0]andMDI[1])
ofdetectionresultsaredisplayed.
4.2.24setporteee
Purpose
Thiscommandenablesordisablestheportenergy-savingfunction.
CommandMode
Allcongurationmodes
Syntax
setport<portlist>eee{enable|disable}
ParameterDescription
ParameterDescription
[<portlist>]Portlist.
enableEnablestheportenergy-savingfunction.
disableDisablestheportenergy-savingfunction.
Default
Theportenergy-savingfunctionisdisabled.
4-60
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential