Need help?Do you have a question about the Zte ZXR10 5250-28SM and is the answer not in the manual?
General| Model | ZXR10 5250-28SM |
|---|---|
| Switching Capacity | 128 Gbps |
| Forwarding performance | 95.2 Mpps |
| Forwarding Rate | 95.2 Mpps |
| MAC Address Table | 16K |
| Jumbo Frame Support | 9K Bytes |
| Storage Temperature | -40°C to 70°C |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 440mm x 260mm x 44mm |
| Weight | 3.5 kg |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| Ports | 24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP |
Provides guidance on safe equipment installation, operation, and maintenance.
Explains warning and caution symbols indicating potentially hazardous situations.
Describes the hierarchical command modes used for configuring and managing switches.
Defines common parameters used across various commands, such as port lists, VLAN IDs, and MAC addresses.
Covers commands for creating directories, deleting files, renaming, and displaying file system contents.
Details methods for transferring files using TFTP, FTP, and Cluster Commander.
Explains formatting flash memory and updating bootrom, with warnings about irreversible actions.
Covers enabling and configuring the automatic upload of configuration files to a TFTP server.
Manages cluster, routing, SNMP, file system, user accounts, and banner configurations.
Controls port enable/disable, work mode, speed, duplex, flow control, and other port settings.
Manages VLANs, including enabling/disabling, adding/deleting ports and trunks, and protocol mapping.
Configures Access Control Lists (ACLs) for ingress and egress traffic, supporting various rule types.
Manages Quality of Service (QoS) settings, including priority mapping, queue scheduling, traffic shaping, and policing.
Covers DHCP snooping, option82, IP source guard, and relay functions for IPv4 and IPv6.
Configures Link Layer Discovery Protocol (LLDP) settings like hello timers, neighbors, and port status.
Configures remote access control, allowing specific IP addresses or any IP address to manage the switch.
Manages command grading and privilege levels for different user access modes.
Enables/disables SSH, regenerates keys, and shows SSH/SFTP status for secure remote access.
Configures SNMP settings, including engine ID, communities, views, traps, and user settings for V1, V2c, and V3.
Configures Remote Monitoring (RMON) for statistics, alarms, events, and history tracking.
Manages ZTE Discovery Protocol (ZDP) and ZTE Topology Protocol (ZTP) settings, including timers and topology collection.
To Next Page
