Zte ZXR10 5250-28SM User Manual

Chapter4ServiceConguration
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableEnablestheforcedUDLDmonologuedetectionfunction.
disableDisablestheforcedUDLDmonologuedetectionfunction.
Guidelines
Theforcedmonologuedetectionfunctionisdescribedasfollows:AftertheUDLDprotocol
detectsalinkproblemandblocksthefaultyport,aUDLDpacketmustbereceivedwithin
thecongureddetectiontimeifthisportisrecovered.Ifnot,itisstillconsideredthattheport
isinfailurestatus,andthenfurtheractionswillbetakeninaccordancewithcongurations.
Default
TheforcedUDLDmonologuedetectionfunctionisdisabled.
4.36.10udldportforce-checktimer
Purpose
ThiscommandsetstheforcedUDLDmonologuedetectionperiod.
CommandMode
Globalcongurationmode
Syntax
udldport<portlist>force-checktimer<15-300>
ParameterDescription
ParameterDescription
<portlist>Portlist
force-checktimer<15-300>ForcedUDLDmonologuedetectionperiod(seconds)
Guidelines
TheperiodstartswhenUDLDRecoverybeginstorestoretheport.IfnoUDLDpacketis
receivedbeforethetimerexpires,itisconsideredthattheportisstillinfailurestatus.
Default
TheforcedUDLDmonologuedetectionperiodis30seconds.
4-539
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP