Need help?Do you have a question about the Zte ZXR10 2918E and is the answer not in the manual?
General| VLANs | 4K |
|---|---|
| Jumbo Frame | 9K |
| Power Supply | AC: 100~240V, 50~60Hz |
| Operating Temperature | 0°C~45°C |
| Storage Temperature | -40°C~70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5%~95% (non-condensing) |
| Power Consumption | <=25W |
Describes different switch configuration modes based on network connectivity.
Explains various command modes (User, Global, SNMP, etc.) and navigation.
Details command line usage, including online help and abbreviations.
Manages FLASH memory for files, including directory and file operations.
Describes importing and exporting switch configuration files for backup/restore.
Provides procedures for upgrading switch software under normal and abnormal conditions.
Covers basic management settings like mode switching and user access.
Details configuring port parameters like auto-negotiation, duplex, and rate.
Covers VLAN configuration, including ports, trunks, and protocol VLANs.
Explains STP, RSTP, and MSTP for preventing network loops.
Explains Access Control Lists (ACLs) for packet filtering and traffic control.
Covers IPv4 layer-3 functions like IP addressing, static routing, and ARP.
Covers NAS using 802.1x and RADIUS for subscriber authentication and management.
Details TACACS+ for centralized authentication, authorization, and accounting.
Explains DHCP Relay for forwarding IP address requests between DHCP clients and servers.
Configures restrictive access for management users, limiting access to specified IP addresses.
Details Secure Shell (SSH) for secure remote access and network services.
Explains SNMP for monitoring network devices and collecting management information.
Details accessing the switch via a Web browser for remote management.
Provides daily and monthly maintenance items for checking switch status and connectivity.
Explains Virtual Line Detection (VCT) using TDR for line diagnosis and fault location.
Analyzes and provides solutions for common faults like configuration, Telnet, and WEB connection failures.
To Next Page