Zte ZXR10 2918E - Layer 2 Protocol Transparent Transmission Configuration

Chapter4ServiceConguration
community-trunks:
pvlansession:2
promis-ports:
promis-trunks:1
isolate-ports:4-6
isolate-trunks:
community-ports:
community-trunks:
4.15Layer2ProtocolTransparentTransmission
Conguration
Layer2ProtocolTransparentTransmissionOverview
IEEE802.1xisaPort-BasedNetworkAccessControlprotocol.Port-basednetwork
accesscontrolisawaytoauthenticateandauthorizetheuserstobeconnectedto
theLANequipment.Thistypeofauthenticationprovidesapoint-to-pintsubscriber
identicationmethodintheLAN.
ZXR102900Eprovides802.1xtransparenttransmissionfunctionwhichtransparently
transmits802.1xprotocolpacketsfromtheclienttotheauthenticationserverfor
authentication.
ZXR102900Eprovides802.1xtransparenttransmissionfunction.Italsoprovideslayer-2
transparenttransmissionfunctionsuchasSTP ,LACP/OAM,ZGMP,LLDPandGVRP.The
protocolrangeis0x00,0x02-0x2f.
Thecommonlayer-2protocolsareshownbelow.
ProtocolNumberProtocol
0x00STP
0x02LACP/OAM
0x03802.1x
0x09ZGMP
0x0ELLDP
0x21GVRP
ConguringLayer2ProtocolTransparentTransmission
Thecongurationoflayer-2protocoltransparenttransmissionincludesthefollowing
commands:
4-59
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential