Need help?Do you have a question about the Zte ZXR10 2918E-PS and is the answer not in the manual?
General| MAC Address Table Size | 8K |
|---|---|
| VLANs | 4K |
| Jumbo Frame | 9K |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| PoE | 802.3af/at |
| Power Supply | AC 100-240V |
| Dimensions (W x D x H) | 440mm x 44mm |
General introduction to the manual's scope and applicability.
Lists the chapters and their summaries.
Describes the layer-2 switching performance and features.
Details the redundancy and fast switching mechanisms.
Covers user and equipment level security functions.
Explains Quality of Service features for traffic management.
Lists different ways to manage the switch (SNMP, CLI, Web).
Explains different modes for configuring the switch.
Describes user mode, global configuration mode, and specific modes.
Lists and describes common parameters used in commands.
Details operations on the switch's file system.
How to transfer configuration files to/from the switch.
Procedures for upgrading the switch software.
Covers mode switching, console attributes, and user access.
Details how to configure port parameters like negotiation and speed.
Covers configuration of Virtual Local Area Networks.
Covers Access Control List configuration for security.
Details Quality of Service configuration for traffic prioritization.
Details IPv4 routing and interface configuration.
Covers authentication and authorization for network access.
Restrictive mechanism for network management access.
Secure Shell protocol for secure remote access.
Manages command line access levels and permissions.
Simple Network Management Protocol for network monitoring.
Web-based management using a browser.
Telnet protocol for remote Internet login service.
Daily and monthly checks for switch operation.
Uses TDR for line diagnosis and fault location.
Procedures for diagnosing and resolving common hardware/software faults.
Procedure to recover lost login credentials.
Addressing network issues caused by ARP broadcast storms.
To Next Page