Zte ZXR10 5250 Series - Set Qos Traffic-Limit Port Protect

ZXR105250SeriesCommandReference
Syntax
setqostraffic-limitport<1-28>percent<1-100>
ParameterDescription
ParameterDescription
<1-28>
Portnumber.Therangevarieswiththedevicetype.Usethe
5250–28TCasanexample.
<1-100>Percent.
Example
Thefollowingexamplesetsthepercentoftheingressratelimittothephysicalbandwidth
to50forport2:
zte(cfg)#setqostraffic-limitport2percent50
4.14.22setqostraffic-limitportprotect
Purpose
Thiscommandsetsportprotection.Whenthetrafcontheportexceedstheratelimit,the
portisshutdownandbecomesunavailableforaspeciedperiod.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitport<1-28>protect{enable|disable|time<1-10>}
ParameterDescription
ParameterDescription
<1-28>
Portnumber.Therangevarieswiththedevicetype.Usethe
5250–28TCasanexample.
enableEnablestheportprotectionfunction.
disableDisablestheportprotectionfunction.
timeShutsdowntheport.
<1-10>Durationwhentheportisunavailable,unit:minutes.
Guidelines
Thiscommandismutuallyexclusivewiththesetqostraffic-limitporttrapcommand.
4-318
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential