Zte ZXR10 5250 Series - 4.18 IPv6 Layer 3 Configuration

Chapter4ServiceConguration
Default
Alltemplatesareall0s,thatis,SPschedulingpolicy.
Example
Thefollowingexamplecongurestemplate1inwhichqueues1and2arescheduledin
accordancewith1:2,queues4and5arescheduledinaccordancewith2:4,andother
queuesarescheduledinaccordancewithSP:
zte(cfg)#setqosqueue-schedulesession1010200204000
zte(cfg)#showqosqueue-schedulesession1
EgressQueueScheduleProfileTable:
SessionBind:Profile-1ScheduleMode:bytemode
queuenumber:01234567
queueweight:SP1020SP2040SPSP
4.14.13setqostraffic-limitmode
Purpose
Thiscommandsetstheglobalingressratelimitmode.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitmode{byte|packet}
ParameterDescription
ParameterDescription
byte
Setstheglobalingressratelimitmodetobyte-basedmode.The
unitofdata-rateisKbps.
packet
Setstheglobalingressratelimitmodetopacket-basedmode.
Theunitofdata-rateisKpps.
Example
Thefollowingexamplesetstheingressratelimitmodetobyte-basedinglobalconguration
mode:
zte(cfg)#setqostraffic-limitmodebyte
4-311
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential