Zte ZXR10 5250 Series - Set Pppoe-Plus Mode Port; ZESR Configuration; Set Zesr Ctrl-Vlan Protect-Instance

Chapter4ServiceConguration
zte(cfg)#showpppoe-plusport2
PPPoEVSTremoteIDonport2:port2
4.28.7setpppoe-plusmodeport
Purpose
Thiscommandsetsthemodeofhandlingdynamicuserinformationonaport.
CommandMode
Globalcongurationmode
Syntax
setpppoe-plusmodeport<1-52>{default|drop|modify}
ParameterDescription
ParameterDescription
<1-52>
Portnumber.Differentdeviceshavedifferentportnumberranges.
Inthesyntax,the5250-52TCdeviceisusedasanexample.
default
Defaultmode,inwhichthepppoe+taginformationinpacketswill
notbemodied.
drop
Dropmode,inwhichthepacketscarryingthepppoe+tag
informationwillbediscarded.
modify
Modifymode,inwhichthepppoe+taginformationinpacketswill
bereplacedbythelocalpppoe+taginformation.
Guidelines
WhenaPPPoEpacketcarryingthepppoe+taginformationisreceived,theportdirectly
forwardsthepackettotheserverifthemodeisdefault,ordiscardsthepacketifthemode
isdrop,orreplacesthepppoe+tagwiththelocalpppoe+tagandthenforwardsthepacket
totheserverifthemodeismodify.
4.29ZESRConguration
4.29.1setzesrctrl-vlanprotect-instance
Purpose
ThiscommandbindsacontrolVLANtoaSTPinstance.
4-477
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential