Zte ZXR10 5250 Series - Set Mac Logging-Alarm Interval

ZXR105250SeriesCommandReference
CommandMode
Globalcongurationmode
Syntax
setmaclogging-alarm{station-move|threshold-state}{enable|disable}
ParameterDescription
ParameterDescription
station-moveMACdriftalarmswitch.
threshold-state
ThresholdalarmswitchusedtoremindthatthenumberofMAC
addressesisabouttoreachthethreshold.
enableEnablesthealarmswitch.
disableDisablesthealarmswitch.
Default
Thedriftalarmswitchisdisabled.
Thethresholdalarmswitchisenabled.
Example
ThefollowingexampleenablestheMACeventalarmfunction:
zte(cfg)#setmaclogging-alarmstation-moveenable
4.7.23setmaclogging-alarminterval
Purpose
ThiscommandsetstheintervalforMACeventalarmoutput.
CommandMode
Globalcongurationmode
Syntax
setmaclogging-alarminterval<1-900>
ParameterDescription
ParameterDescription
<0-256>Alarminterval(seconds).
4-106
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential