Zte ZXR10 5250 Series - Set Trap Enable;Disable

ZXR105250SeriesCommandReference
zte(cfg-snmp)#sethost10.40.44.167informv3unameauth
5.4.12settrapenable/disable
Purpose
Thiscommandenablesordisablesthetrapfunctionssuchaslinkup/down,authentication
failure,coldstart/warmstart,clustertopologychanging,clustermemberup/down,and
loopdetect.
CommandMode
SNMPcongurationmode
Syntax
settrap{adminPasswordNoChange|arpOverload|authenticationfail|bootfileLost|cfmFaul
tAlarm|coldstart|cpuUserationThreshold|dhcpChaddrCheck|dyinggaspstatus|fanSpeed
|fanstatuscheck|fileTransfer|ipConflict|linkdown|linkmonitorstatus|Linkup|macnotif
ication|macStationmove|macOverload|memberUpDown|memuserationthreshold|poe|
portloopdetect|powerdown|powerstatus|protocolprotect|trafficLimitProtect|trafficLimit
|duplexHalfMode|remotediscovery|remotelinkstatus|stpBridgeRoleChange|stpPortSta
teChange|temperature|topologychange|trunkloopdetect|udldunidirectional|warmstart
|dismanpingnotifications|crcLimit|all}{enable|disable}
ParameterDescription
ParameterDescription
adminPasswordNoChangeIfanadminuserexistsinthesystemandtheuser'spasswordis
thedefaultpassword“zhongxing”,atrapalarmisreported.This
alarmisreportedoneminuteafterthesystemisstarted,anditis
reportedat1-hourintervalsafterwards.
arpOverloadARPtableoverloadalarm.
authenticationfailAuthenticationfailure.
bootfileLostBootlelostalarm.
cfmFaultAlarmCFMfaultalarm.
coldstartColdstart(shuttingdownthepowerandstartingthesystemagain).
cpuUserationThresholdTheCPUusageexceedsordropstothethreshold.
dhcpChaddrCheckThechaddreldinaDHCPpacketisabnormal.
dyinggaspstatusOAMlinkinvalidityevent.
fanSpeedFanspeed.
fanstatuscheckFanoperationisabnormalorrestoredtonormal.
5-16
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential