Zte ZXR10 5250 Series - Set Dhcp Hop; Clear Ipport Dhcp Relay

ZXR105250SeriesCommandReference
Example
zte(cfg)#setdhcprelayvlan2enable
zte(cfg)#showdhcprelayvlan
DHCPrelayenabledvlan:2
4.40.22setdhcphop
Purpose
ThiscommandsetsthehoplimitsofaDHCPrelay.
CommandMode
Globalcongurationmode
Syntax
setdhcphop<1-16>
ParameterDescription
ParameterDescription
<1-16>HoplimitofaDHCPrelay.
Example
ThefollowingexamplesetsthehoplimitofaDHCPrelayto10:
zte(cfg)#setdhcphop10
4.40.23clearipportdhcprelay
Purpose
ThiscommandclearstheDHCPrelaycongurationonaport.
CommandMode
Layer-3congurationmode
Syntax
clearipport<0-63>dhcprelay{agent|server<A.B.C.D>}
4-564
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential