Zte ZXR10 5250 Series - Iptv Port Control-Mode

ZXR105250SeriesCommandReference
Syntax
iptvport<portlist>[vlan<1-4094>]service{start|remove|pause|resume}
Parameters
ParameterDescription
<portlist>Portlist.
vlan<1-4094>VLANID.
startStartsservices.Theservicedatatakeseffect.
removeCancelsservicestoclearservicedata.
pausePausesservicestoreservetheservicedata.
resumeRestoresservices.
Guidelines
IftheVLANIDisnotset,thecommandsetstheglobalservicestatus.
Default
Servicesarecancelled.
Example
Thefollowingexamplestartsservicesofport1inVLAN1000:
zte(cfg-nas)#iptvport1vlan1000servicestart
4.11.33iptvportcontrol-mode
Purpose
Thiscommandsetsamulticastcontrolmode.
CommandMode
NAScongurationmode
Syntax
iptvport<portlist>[vlan<1-4094>]control-mode{package|channel}
ParameterDescription
ParameterDescription
<portlist>Portlist.
vlan<1-4094>VLANID.
4-174
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential