Zte ZXR10 5250 Series - Set Poe Port Extend-Detection

ZXR105250SeriesCommandReference
Default
Theforcedpower-onfunctionisdisabled.
Example
Thefollowingexampleenablestheforcedpower-onfunctionforport1.
zte(cfg)#setpoeport1/1forcepowerenable
4.3.5setpoeportextend-detection
Purpose
Thiscommandenablesordisablestheportextend-detectionfunction.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>extend-detection{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableEnablestheextend-detectionfunction.
disableDisablestheextend-detectionfunction.
Guidelines
Iftheextend-detectionfunctionisenabled,powersupplywillbeprovidedforportswhen
non-standardPDdevices(suchasCiscohigh-capacitydevices)aredetected.Ifthe
extend-detectionfunctionisdisabled,powersupplywillbeprovidedforportsonlywhen
standardPDdevicesaredetected.
Default
Theextend-detectionfunctionisdisabled.
Example
Thefollowingexampleenablestheextend-detectionfunctionforport3:
zte(cfg)#setpoeport1/3extend-detectionenable
4-66
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential