Zte ZXR10 5250 Series - 4.17 IPv4 Layer 3 Configuration

ZXR105250SeriesCommandReference
ParameterDescription
<udb-value>ThevaluethatUdb14mustmatch.
<udb-mask>ThemaskthatUdb14mustmatch.
Udb15Fifteenthuser-denedbyte.
<udb-value>ThevaluethatUdb15mustmatch.
<udb-mask>ThemaskthatUdb15mustmatch.
Guidelines
Youcanconguremultipleuser-denedbytesinsteadofalluser-denedbytes.The
congurationcannotbevalidatedunlessthestartlocationsoftheuser-denedbytesare
conguredrst.
Example
Thefollowingexamplesetstheactiontodenyudb1,theudb1valueto0x01,andthemask
to0xffforrule1:
zte(ingress-user-define-acl)#rule1denyudb10x010xff
4.13.85clearingress-acluser-define
Purpose
Thiscommanddeletesauser-denedingressACLinstance.
CommandMode
Globalcongurationmode
Syntax
clearingress-acluser-definenumber<801-828>
ParameterDescription
ParameterMode
<801-828>Serialnumberofauser-denedingressACLinstance
4.13.86clearacludbdescription
Purpose
Thiscommanddeletesthedescriptionofauser-denedbyte.
4-298
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential