Zte ZXR10 5250 Series - 4.37 TACACS+ Configuration

ZXR105250SeriesCommandReference
CommandMode
Globalcongurationmode
Syntax
setzesrctrl-vlan<1-4094>level<1-2>seg<1-10>preforward<10-600>[preup<0-500>]
ParameterDescription
ParameterDescription
<1-4094>ControlVLANIDinaZESRdomain,range:1–4094.
<1-2>Level,range:1–2.
<1-10>SegmentID,range:1–10.
<10-600>Preforwardtime,range:10–600,default:10,unit:seconds.
preup<0-500>Preuptime,range:0–500,default:0,unit:seconds.
Example
Thefollowingexamplesetsthepreforwardtimeto11andpreuptimeto1foranodein
level1segment1VLAN1inaZESRcontrolVLAN:
zte(cfg)#setzesrctrl-vlan1level1seg1preforward11preup1
4.29.8setzesrlink-hello
Purpose
Thiscommandenablesordisablesthelink-hellofunction.
CommandMode
Globalcongurationmode
Syntax
setzesrlink-hello<port-id>{normal|special}
ParameterDescription
ParameterDescription
<port-id>Portforwhichthelink-hellofunctionistobeset.
normalDisablesthelink-hellofunction.
specialEnablesthelink-hellofunction.
Example
Thefollowingexampleenablesthelink-hellofunctiononport1/1:
4-482
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential