Zte ZXR10 5250 Series - 4.21 QinQ Configuration

ZXR105250SeriesCommandReference
ParameterDescription
ParameterDescription
<0-383>FlowpolicerID
4.14.68showpolicy
Purpose
Thiscommandshowsvariousbindingcongurationsofthespeciedow.
CommandMode
Allcongurationmodes
Syntax
showpolicy[mirror|redirect|statistics|policing[<0-383>]|vlan-remark|remark|harddr
op]
Parameters
ParameterDescription
mirrorShowsthebindingcongurationofowmirroring.
redirectShowsthebindingcongurationofowredirection.
statisticsShowsthebindingcongurationofowstatistics.
policing<0-383>
Showsthebindingcongurationofaowpolicerorallow
policers.0to255areusedforingressACLs.256to383areused
foregressACLs.
vlan-remarkShowsthebindingcongurationofVLANtagmodication.
remarkShowsthebindingcongurationofUP/DSCPmodication.
harddropShowsthebindingcongurationofharddrop.
Guidelines
Thecommandwithoutanyparametersshowsallthebindingcongurations.
Example
Thefollowingexampleshowsallthebindingcongurations:
zte(cfg)#showpolicy
Totalqospolicyrulenumber:1
---------------------------------------------------------------
setpolicypolicinginacl1rule1policer10
4-350
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential